Announcement

Collapse
No announcement yet.

Need TJ Half Door Measurement

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need TJ Half Door Measurement

    Any one with a set of factory half doors for a TJ that can take a measurement for me? Needing to know what the spacing is on a set of half door uppers (the window frame part covered in fabric). The pegs that slide down into the door, what is the measurement between the pegs?

    Apologies for the crude drawing, but I need the measurement center to center between the pegs. And the distance from the front peg to the front edge of the window frame and the rear peg to the back edge of the frame. Highlighted with blue arrows. Have a set of uppers and want to make sure they are the same.

    Any help would be greatly appreciated.

    Attached Files

  • #2
    I have a 2000 TJ. I can do the measurements after work. It will be late tonight.

    Comment


    • #3
      Originally posted by LostHi View Post
      I have a 2000 TJ. I can do the measurements after work. It will be late tonight.
      I would greatly appreciate it!!

      Comment

      Working...
      X